I Can’t Access My Amped Extender SSID! Please Help!

“I have successfully completed Amped extender setup but I am not able to access its SSID. I fail to understand why I am facing the issue while accessing the extender’s WiFi. Can you please help me fixing it? I am desperate!” – Amped extender user!Are you also facing the same issue? If you nod in yes, then this Amped wireless troubleshooting guide can help you. Here, we have provided the best hacks through which you can easily have access to the SSID of your WiFi range extender. Keep reading!

Fixed: Can’t Access Amped Extender SSID

Fix 1: Power Cycle Your Amped Extender

Technical glitches are the topmost reason which is why you are facing the “can’t access Amped extender SSID” issue. For fixing the issue, we suggest all our users to power cycle their WiFi range extender.

Here are the instructions to power cycle the WiFi range extender:

• First of all, turn off your WiFi range extender.

• You also need to disconnect your extender from your host router.

• Wait for a couple of seconds.

• Turn on your WiFi range extender and reconnect it to your router.

Still having hard time to access the SSID of your WiFi range extender? If the answer to this question is yes, then you must try the next hack in line.

Fix 2: Check the Connection Between Devices

Another hack through which you can resolve the issue from the comfort of your home is to check the connection made by you between your WiFi extender and router. Chances are you have not connected your devices in a proper way due to which you are facing the issue.

So, all you need to do is to connect them in a proper way either using an Ethernet or a wireless source. But, keep in mind, if you have opted for a wireless source, then you must keep your devices in reach of each other.

But, if you have used an Ethernet source, the wire you have used must be free of cuts and other damages.

Are you able to access the SSID of your device? Verify it by accessing Amped range extender login page.

Fix 3: Relocate Your Amped Extender

Are you still going mad because of the same issue? If so, it seems like your WiFi range extender is placed on a very bad location. So, to access the SSID of your extender without any hassle, make sure that:

• The smart device in which you are accessing the extender’s SSID is in reach of your Amped device.

• You have not placed the extender inside your cabinet or beneath your computer table.

Need More Help?

Be sure that you have enabled the extender’s SSID. Look, if you have hidden the SSID, then you will surely face issues while accessing it. So, simply enable the SSID and see if you rack up success. Also, if you have changed the Amped extender’s SSID, then make sure you are accessing the correct one.

Fix 4: Reset Your Amped Extender

Even after trying all the fixes listed above, it seems like you are going out of luck, isn’t it? If yes, then resetting is the last yet effective option that can help you. So, without much delay, follow the guideline outlines underneath and know how to reset Amped extender:

• Firstly, disconnect your WiFi range extender and your router.

• Once you are done disconnecting the device, press and hold the extender’s reset button.

• Hold up the button for a couple of seconds and then release it.

Once you are done resetting your WiFi range extender, reconnect it to your router via Ethernet or wireless source and perform Amped extender setup again.

As soon as you are done setting up the extender in a successful manner, you will get the new extended SSID.

Here’s to hope that after resetting and reconfiguring the Amped extender, you are able to access its SSID. If yes, then do Amped wireless extender login right now and update the firmware of the device to the latest version.

So, did you find this article and the fixes provided here helpful?